Baumfolder Baumcut Programmable 26.4 Instrukcja Użytkownika Pobierz pdf (Strona 67)

K5B - 7

5.0 Automatic Operation

Preset Functions

Selection of "Main Menu":

Correction of Current Position

Basic measurement = distance between backgauge rake and knife

This menu allows the inspection and correction of the basic position (actual

position) of the machine.

If the basic measurement indicated corresponds to the actual

backgauge position:

Select "Current Position OK“ .

If the basic measurement indicated does not correspond to the actual

backgauge position:

Select "Correct. current pos.":

Calculate basic position:

1. Position backgauge at any position (e.g.: 10.5 cm)

2. Feed paper and cut it

3. Place backgauge at smaller size (e.g. 10 cm)

4. Turn paper by 180° and cut again

5. Determine actual paper length of the part by sliding caliper (e.g. 10.2 cm)

6. Enter and store measured size.

From this display you can activate the Auxiliary Operation -

see also chapter "7.0 Malfunctions/Breakdowns".

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 103 104

Brak uwag

Baumfolder Baumcut Programmable 26.4 Instrukcja Użytkownika Strona 67